[Manual] Display Stands for Speed Champions

So you’ve bought a stand or are still considering it? You’ve come to the right place! This guide is prepared just for you. Step by step, I’ll show you how to properly mount the model on the stand so it can quickly find its place on your shelf!

Prepare yourself!

To mount, you’ll need a crosshead screwdriver – specifically PZ1 and PZ2, which you can find in the toolbox in any household.

1. Screw the arm to the base

Use the larger screw (3,5x16mm) included with the stand to screw the vertical arm to the base. Pay attention to the orientation of the arm – compare it with the photo.

2. Screw all arms to bases

Depending on the stand you ordered, your stand will contain from 1 to 4 bases and arms – screw all of them together

3. Screw mouting brackets

Use the smaller screw (3x12mm) included in the set to tighten the mounting bracket.

The appearance of the brackets may vary and depends on the selected cars compatible with the stand.

Brackets can be mounted horizontally (usually) or vertically (very rarely) for very specific cars.

4. Mount the cars to the mounting brackets

The brackets are numbered 4, 5, 6, 12, 13 – match the appropriate bracket to the car you want to place at a given level. Use the List of cars and brackets that fit them for this.

e.g., 76922 Speed Champions BMW M4 GT3 —> 12stud

For this model, screw the mounting bracket marked “12”.

5. Connect the assembled bases with the cars together

The bases are equipped with original LEGO bricks for connection.

If you want, you can also display the cars separately.

6. Arrange the figures (optional)

The bases provide space for placing figures.

Bases can also be ordered without this module

7. Connect the figurine base

Attach the figure base to the front of the cars or display separately.

Final effect ❤️️

Dodaj komentarz

Witryna wykorzystuje Akismet, aby ograniczyć spam. Dowiedz się więcej jak przetwarzane są dane komentarzy.